Problems with the doors? Fix it yourself with these tips

Defect no. 1: the creaking door

Stop being scared by that annoying noise your door makes when it opens and closes. The solution is very simple: use an aerosol lubricating oil. Lubricating oil is perfect for fixing squeaky doors. There are many brands of lubricating oil that may be suitable for this purpose. The oil must penetrate the hinges and for this reason the applicators supplied with the container have a thin nozzle to be able to access all the corners.

If the door has become uneven and is no longer straight, you can reinforce it with squares. Remove the door by hitting the hinge pins with a hammer and punch. Place the door on the frame on small wooden wedges, so that it is parallel and perpendicular to the frame. Then, assuming the door frame is actually straight, attach the brackets to the corners of the door. Identify the correct positions for the four teams and mark them. Make the necessary recesses for the squares with a chisel or an electric router. Fill the cavities with two-component adhesive and secure the supports with wood screws. After uniformly sanding the areas around the consoles,

Travertine marble: what it is and how this material is used in modern architecture

Bankruptcy n. 3: the door gets stuck

First check whether the door is stuck at the top or bottom. The hinge may be loose or a screw head may be sticking out, preventing the door from staying completely straight. If you can’t tighten the hinges or if the screw holes are too large, you can replace the screws with longer or thicker ones with the same head size, or fill the screw hole with a match. It is also possible that the zippers are worn. In this case, if you replace them with new hinges, it is possible that the door will return straight.

Defect #4: The door rubbing against the floor

One of the most frequent problems that arise in a home over time is that of doors rubbing against the hinges or the floor. It is generally due to the loosening of the screws that hold it or to a deformation of the wood. But both situations have a solution: adjust the hinges, sand or brush the wood, as I described before, or insert washers into the hinges to raise the level of the door. Like a pro.

Defect no. 5: the remaining door

When this happens, an easy way to fix the problem is to use a wood planer or belt sander, you can also do this with sandpaper, but it will be more laborious and time consuming. Look at the door, open and close it several times to determine which side is rubbing and how much sanding will be necessary. To do this, you need to dismantle the door by removing the hinges. It is advisable to work outdoors because sawdust and dust will fly everywhere; If you have a flat table or racks to support the door, it will be more convenient to smooth it and it will be safer. If you use an electric sander be careful, they are very powerful and in a few seconds you may have sanded more than necessary.

Other damage

Sometimes the door handle gets stuck; It doesn’t open or close well and you have to force it too much. By disassembling it and re-lubricating all the gears, you can get it running like a charm again without having to change it.

15 colors that you can successfully combine with any shade of gray