Which glue is good for gluing PVC pipes?

There are various pipe adhesives that can be used to join PVC pipes, but the best and most trustworthy choice is a product specifically made for this material and this use. These adhesives are created for strong, lasting connections and are tougher and more resistant to chemicals, pressure, and water than regular adhesives.

The aim of these adhesives for PVC pipes, plumbing, and fittings is to make a strong and enduring bond. A quality PVC adhesive should have the following features: it needs to be easy to use, create a tight seal, resistant to rust, pressure, temperature shifts, and harsh chemicals, among others.

Special adhesive for PVC pipes

A popular brand of adhesive specifically designed for use with PVC pipes, ducts and installations is Griffon adhesive. This industrial strength adhesive is suitable for a variety of applications, including plumbing or potable water and drainage systems, and is known for its high-strength, fast-setting adhesion properties. In addition, Griffon adhesive has low odor, is very resistant to temperature changes and many aggressive chemicals, and the bonding will remain secure for a long period of time.

You can find different types of Griffon rapid thixotropic adhesives for PVC on Econstruk – an online store offering a wide variety of high-quality products for home renovation, construction and repair projects -, including:

• PVC Pipe Gel Adhesive – For joining tight or extra wide fit pipes and fittings in pressure and exhaust systems. Suitable for diameters up to 250 mm. Resists PN 16 pressures.
• T-88 Rigid PVC Adhesive, with special application brush – Suitable for joining pipes and interference fittings for pressure and drainage systems. Suitable for diameters ≤ 160 mm. Resists PN 16 pressures.
• Uni-100 PVC Pipe Gel Adhesive – For joining pipes, sockets and fittings with tightness adjustment or very wide adjustment (gap filling). It can also be used in pressure and drainage systems, being approved for drinking water systems. It is suitable for diameters up to 315 mm. Resists PN 16 pressures.
• Adhesive for gluing the PVC pipe system of swimming pools WDF-05. It is suitable for gluing PVC pipes and joints in swimming pools. It is resistant to chemical solutions used to purify and disinfect swimming pool water (chlorine, special purification salts, decalcifying solutions, etc.)

Some of the direct benefits of these adhesives are exceptional bond strength, durability and cost efficiency.

How to use PVC pipe adhesive?

To use Griffon adhesive or any other PVC adhesive, follow the manufacturer’s instructions and take appropriate precautions to protect yourself and your work area. Be sure to thoroughly clean the surface of the PVC pipe before applying the adhesive and allow the adhesive to fully cure before subjecting the bond to weight or pressure loads.

To use Griffon adhesive on PVC fittings and pipes, follow these steps:

• Cut the PVC pipe at a right angle, twist the edges and deburr.
• Thoroughly clean the surface of the fitting or PVC pipe with a dry cloth to remove any dirt, dust or debris. You can use the special Griffon Cleaner cleaning solution, which also removes deep-seated dirt/grease/oils.
• Apply a thin, uniform layer of Griffon glue to the PVC pipes to be glued, along the entire length of both surfaces (thick layer on the pipe, thin layer on the base). Use a brush or applicator to evenly distribute the adhesive.
• Immediately press the two surfaces together firmly and hold them in place for at least 30 seconds.
• Remove excess adhesive.
• Allow the adhesive to harden according to the time indicated on the package before subjecting the surfaces to any type of pressure/load.

Depending on the specifications of the product you choose, the steps may be slightly different. To find out exactly what aspects you need to take into consideration when using a certain Griffon PVC adhesive, we recommend that you consult the Econstrukt website, where the way to use the products is explained for each individual PVC adhesive.

It is important to follow the manufacturer’s instructions and use caution when working with any type of PVC adhesive. Be sure to wear gloves, protect your skin and eyes, and work in a well-ventilated area to avoid inhaling any vapors.

Griffon adhesive is the perfect choice for PVC pipes, because it is easy to apply, forms a flexible bond, has a low odor and can resist temperature changes and harsh chemicals. Furthermore, it is the best choice for PVC pipes due to its ease of use, strong adhesion and affordable price.

Go to the Econstrukt online store site now and consult the offer of adhesives for PVC pipes, pipes and sanitary systems, to choose the products you need!